Are Honma Golf Clubs Good For Pro Golfers?

We’d be answering the question ‘are Honma golf clubs good for pro golfers?’ As a golf enthusiast, you should know that the quality of the golf kits you use determines how good you’ll be. Honma golf clubs are one of the best around, and if you want to do well, you’d need them. If you read through this guide, you’ll see they are actually good.

Without any doubt, Honma is the most popular Japanese manufacturer and if you ask most golfers about the brand, you’ll hear them talk about its luxury or its high cost. So, Honma has this expensive image and that won’t just go away quickly.

Beres

The concept of Beres is to make the game as easy as possible and Honma succeeds in this category like no other manufacturer. The reason for this is that the clubhead and shafts form a unit and everything is handmade in Sakata, Japan.

And especially the shafts make these clubs so special because they are extremely light and soft and still have very good torsion values. No other manufacturer does this as well as Honma. Especially players with a low clubhead speed benefit from this and can make their game much easier.

2, 3, 4, or 5 stars?

The principle of Honma’s stars concerns above all the shaft quality. While the 2-star shafts are already very good and practically unique on the market, the other stars still represent an improvement. For example, the 5-star version is extremely difficult to fabricate and therefore very expensive. For many, a 4- or 5-star set is out of the question.

Often our players end up with the woods and drivers with 3 stars because the surcharge is very low and the quality is even better.

Honma Beres Driver

With the driver, it’s about achieving maximum distance and still being able to keep the ball in play. The shaft is especially important. For players with an average clubhead speed, the shaft must be light and some kind of “whip effect”. This is the only way to get the maximum out of a given swing speed. However, it is important that the shaft has a little “torque” as possible. It is basically no art to produce a light and soft shaft.

The art consists in the fact that it has little torque as well. These are the torsions during the stroke which one absolutely wants to prevent and which otherwise get the ball off the desired direction. This is of course especially important for the driver because it is hit with the highest speed.

Honma Beres Irons

The Beres irons can basically be described quite quickly:

  • the center of gravity is particularly low so that a high launch is facilitated
  • the sole is especially wide to allow little interaction with the surface
  • the clubface is extremely thin and allows maximum ball speeds
  • the sweet spot is very big and forgives many mistakes

All these points ensure that Honma’s Beres irons are particularly easy to play, even for players with low clubhead speeds and an inconsistent hitting pattern. These characteristics are combined with the already mentioned light and soft shafts. The result is a relief of your game that couldn’t be greater.

Why Are Honma Golf Clubs So Expensive?

Honma is, without a doubt, the most famous Japanese company for golf accessories, and you will hear them speak about its quality and the high price if you ask most golfers about this brand. Honma, therefore, has this luxurious brand image that is not going anywhere soon. So, to answer why are Honma golf clubs so expensive, there are few key points that make them different from other golf clubs.

  • Usage of Raw materials while making Honma golf clubs

The thing that’s the most exceptional about Honma is that it uses much better special quality steel than ordinary cheap commercial steel. Honma uses special steel which is much stronger than the usual cheap industrial steel.

While most golf club producers use steel too, the one Honma uses is rare, one-of-a-kind soft steel, and exceptional for each ball contact. You will definitely feel the difference if you are using Honma golf clubs as opposed to other clubs.

  • Custom Made Golf Clubs:

Like Honma, no other company will produce custom-made golf clubs. Their innovation of craft can appeal to about any request. Some golf clubs also have gold plating and embellishments of crystals. Their selection of designs is very extensive, with a few clubs crafted for extremely prominent individuals. This is the major reason why so costly Honma golf clubs are.

  • Usage of Hand Forged Irons:

One other thing that is noticeable about the Honma clubs is that they’re still being forged. The Honma TW747 V iron that can be forged from a single piece is a common example of one of the irons. Having said that, it is not that all of their irons, though, can be absolutely forged. For instance, the “two-piece” iron, Honma Beres, could just be partially forged. But you can be certain the Honma iron is forged by hand if it is possible. This hand-forging system is far more complicated and costly than the usual casting procedure.

  • World-Class Designers:

An even more prominent reason why Honma golf clubs are so costly is that they’ve been designed by world-class craftsmen. Some golf clubs also have gold plating and adornments of crystals. The exclusive look and feel of these Honma clubs are the reason why are Honma golf clubs so expensive.

  • Exclusive Handmade Shafts:

This is probably the most prominent reason why are Honma golf clubs so expensive. Honma is recognized all throughout the golf club business sector for producing much of its shafts on special offer. Even though Honma occasionally uses or maybe chooses other competitors’ Tour World iron shafts, it still wants to make its very own shafts. This is plain since Honma does have club creators in the field who are dedicated designers and are able to craft outstanding shafts that are ergonomic for most golfers.

One thing is truly outstanding for their Beres range! Honma Beres is not a pioneer in the language of efficiency for nothing in a single business segment: the ArmRQX shafts are comparatively mild as well as delicate but have outstanding torque values. A crucial consistency criterion for shafts is this specific value.

The larger the number of selected stars, the greater their importance. These distinctive shafts single-handedly make it worthwhile for many players to purchase Beres clubs. These clubs provide you with every kind of advantage to achieve greater performance.

  • Extensive Range to Choose From:

More significantly, the greatest range is available at Honma golf clubs. This is why Japanese golf clubs are so pricey. They are renowned for their light, soft graphite shafts with minimum torque. Golfers can twist when stroking, even though the shaft is light, and it will still move towards the correct direction.

For calculating the worth of their golf clubs, Honma uses stars. Two-star shafts are already very fine for golfers, but to step up the game, they also have very costly 4-5 star shafts that offer the best results.

Are Honma Golf Clubs Good?

If you’re a pro golfer with a slower swing speed and in need of a draw bias, Honma clubs are ideal for you. If not better, Honma clubs perform just like any of the clubs available on the market, and their price is getting better as they are not as expensive as they used to be.

Honma Clubs are great for you if you are a professional golfer with a bit slow swinging pace and is badly in need of a draw bias. Honma clubs function much like most of the clubs accessible on the marketplace if not greater, and their value is gradually improving because they are not as pricey as they used to be anymore. They are amazing, and you would not regret making a purchase.

WHAT MAKES HONMA BETTER THAN ALL THE OTHERS?

With every manufacturer, you should ask yourself what makes them special and unique. For most big manufacturers this is just marketing – just because they have the big names of the tour under the contract does not make the clubs better at the same time.

At Honma, these are quite clearly the in-house shafts like Vizard or ArmRQ. These are pulled by hand and have extremely low fluctuations in regards to shaft quality. These are sometimes very high with many other shafts.

This means that no shaft is like the other. For example, we at ExactGolf only use shafts from manufacturers such as Nippon or Shimada which are also very good in this respect. This does not mean that the shafts from Honma are always better.

However, they are the best in a certain range. And these are the light and soft graphite shafts which nevertheless have little torque. This means that although the shaft can be very light and soft, the twisting during the stroke does not go in an undesirable direction.

The higher the number of stars, the better these values are. The 2-star shafts are already very, very good, but 3, 4 and 5 stars are even better. These also have a higher price tag as mentioned at the beginning.

So if you are looking for a manufacturer that is the best in this area, then the answer is without doubt Honma. These shafts are interesting for averagely good players, women, and seniors who simply need light and soft shafts for their game.

CONCLUSION

Buying Honma clubs can be an experience completely different from buying a standard set of golf clubs. Though you may choose to buy Honmas from stock, the company specializes in custom fittings. The specifications garnered from a fitting session are sent to the Sakata factory, where each club is hand-crafted — from flex to launch angle to club length. The process takes about a month.